Cabcode
Cabcode :
-

Hello!

Use this tool to explore a design :

  • Drag and rotate the image to see the design from all angles
  • Pinch and expand to change the size and visible detail
  • View from Isometric or elevation viewpoints
  • Select wireframe and show machining to examine the connectors and other hardware drilling

    • Information on machining colour coding

    Different colours are used for different machining types:

  • Red : face drilling.
    Common face drilling diameters are 3mm (pilot holes), 5mm (drawer runner holes), 8mm (dowels), 35mm (Blum hinges).
  • Blue : end drilling.
    Common end drilling diameter is 8mm for dowels
  • Yellow : pockets or grooves.
    Machined with either spindle or x-axis saw for long grooves. Clamex fixings are also shown as pockets.
  • Edges Green/Red : highlight L1 and W1 edges.
    The L1 and W1 edges can be highlighted with Green and Red respecitively. Useful for determining orientation of panels.
  • Back Red : highlight back of panel.
    CNC operations are usually done on the 'face' of a panel. However the face is usually in fact the rear of the panel! e.g. for a door the hinges are drilled on the rear of the door but for the drilling operation that side will be called the face.
    • Short name
    Length
    Width
    Thickness
    Material
    X
    Y
    Z
    rotationX
    rotationY
    rotationZ
    		*REF-L200050018BIRCHPLY189100000900
    		*REF-R200050018BIRCHPLY1882710000090180
    		C1-SideL200050018M1-189100000900
    		C1-Bottom76450018BIRCHPLY184001991090900
    		C1-Back198276418BIRCHPLY18400991-24100180
    		C1-Top76448218BIRCHPLY18400999090180
    		C1-SideR200050018BIRCHPLY1879110000090180
    Panelname
    Panel share

    Cabcode

    You are viewing design with Cabcode -

    Load another Cabcode