Pocket doors

Blum REVEGO, cut and drilled

Fronts that slide away into the cabinet, so a whole wall of cupboards stands open. Size the unit in CabCode and we cut and drill every panel exactly as Blum's own CNC programs do.

On the floor

Full-height units standing on the floor, without a plinth.

Two fronts, on the floor

REVEGO duo

Two fronts fold together and slide back into a pocket at one side, opening the whole width of the cabinets behind them. For wide larders, utility and appliance walls, and home offices.

Height1826 to 3006 mm
Width918 to 1518 mm, including the 18 mm end panel
Depth588 to 1000 mm (deeper for wider fronts)
PocketLeft or right
Design a REVEGO duo unit
One front, on the floor

REVEGO uno

One front turns and slides straight back into a pocket at one side, for a narrower opening. For a tall larder, a coffee station or a drinks cabinet.

Height1826 to 3006 mm
Width468 to 918 mm, including the 18 mm end panel
Depth588 to 1000 mm (deeper for wider fronts)
PocketLeft or right
Design a REVEGO uno unit

On a worktop

Units that stand on the worktop, between it and the wall cabinets. The front stands 6 mm above the worktop.

Two fronts, on a worktop

REVEGO duo

Two fronts fold together and slide back into a pocket at one side, opening the whole width of the cabinets behind them. An appliance garage or pantry along the worktop, open with nothing in the way.

Height1155 to 1819 mm
Width918 to 1518 mm, including the 18 mm end panel
Depth588 to 1000 mm (deeper for wider fronts)
PocketLeft or right
Design a REVEGO duo unit for a worktop
One front, on a worktop

REVEGO uno

One front turns and slides straight back into a pocket at one side, for a narrower opening. A coffee or breakfast station on the worktop that closes away.

Height1155 to 1819 mm
Width468 to 918 mm, including the 18 mm end panel
Depth588 to 1000 mm (deeper for wider fronts)
PocketLeft or right
Design a REVEGO uno unit for a worktop

Drilled as Blum drills it

Blum publishes no drilling rules for REVEGO, only a CNC program for each configuration. We worked the rules out from Blum's own configurations and check every panel hole for hole against Blum's programs, across every size band, both hands, floor-standing and worktop-mounted.

What you get

  • The pocket sides, pocket back and fronts, with the shelf and track cover (duo) or top panel (uno), cut and drilled
  • Our 18 mm end panel on the other side
  • Machine files for your own CNC if you prefer: MPR, TCN and CabCodeXF

The Blum hardware

Your order's hardware list names the Blum sets each unit needs, left or right to match, and the length to cut each aluminium piece in them: profiles, cover strips and track.

How it works

  1. Size the unit. Enter its overall height, width and depth, and choose which side the pocket goes. The width includes the end panel.
  2. Floor or worktop. Choose Mounting: on the floor (without a plinth) for a full-height unit, or on a worktop for a unit between worktop and wall cabinets. The worktop buttons above start you with it set.
  3. Fit your cabinets inside. Add ordinary CabCode cabinets in the unit's inside space. CabCode warns you if one does not fit, and by how much.
  4. Order. Cut and drilled panels from us, or the machine files for your own workshop.

Good to know

  • REVEGO units are made in 18 mm board, which Blum's drilling is designed for.
  • Blum gives no drilling for the end panel, which carries the door support and the shelf or top panel fixings, so drill it on assembly.
  • A few sizes between Blum's switch points are not yet verified against Blum's programs. CabCode tells you if your unit is one of them: its panels are then cut without the REVEGO drilling.
  • Units with a plinth and REVEGO combinations are not available yet. If you need one, tell us.

Blum and REVEGO are trade marks of Julius Blum GmbH. CabCode is independent of Blum: we design and drill for Blum's hardware.

drilling@cabcode.uk

Telephone : 0203 889 9227
Text : 07441 359001

Contact Us
About Us