Space Parametric is the design tool to create complicated cabinet configurations.
*** Please note this feature is still being developed at the moment ***
New here? Three steps:
- Divide the overall space using Add horizontal dividers or Add vertical dividers. The divisions can be seen in the Sketch below.
- Add features to the resulting subspaces — doors, drawers, end panels, etc.
- Generate Cabinetry to turn your design into real panels.
Click the help button (bottom-right) for a full walkthrough, sample layouts, or to chat with the AI assistant.
Sketch
100%
Scroll to zoom, drag to pan. On mobile: pinch to zoom, drag to pan
SelectedA
Show only
All spaces
Overall space
H:2000 W:800 D:500
Width
Overall width
Height
Overall height
Depth
Overall depth
Add operations to divide the space
The space can be divided into sub-spaces with shelves and dividers by selecting one of the operations below. Operations can be repeated to create complex internal layouts.
Note: when a space is divided the next operations will apply to the sub-spaces. Therefore the original space will disappear from the "Apply to space" select box and only the sub-spaces can be selected.
Apply to space
End Panels(18mm sides)
Applies to the whole design, spanning its full height. For complex designs where you only want an end panel on one section, leave these off and instead go to Add features, select that space, and add a Panel feature with type End Panel.
Plinth(base panel)
mm
Applies to the whole design, spanning its full width. For complex designs where you only want a plinth under one section, leave this off and instead go to Add features, select that space, and add a Panel feature with type Plinth.
Operation sequence
No dividing operations added yet.
Use Add horizontal dividers or Add vertical dividers above to start dividing the overall space — each operation will then appear here in the order it was applied.
Warning: this permanently discards your current design and cannot be undone.
Copyright 2012-2026 Andrew Moran