Test and develop UI components in isolation
Wooden drawer box for Blum Tandem/Movento drawer runners. The thickness can be specified and different materials/thicknesses for the drawer box underside and sides is possible. Where the drawer box sides are thicker than 12mm the sides will be grooved.
Height: Choose a Blum drawer box code (e.g., M, K, D) which sets the drawer face height based on the box height, or use % to set heights as percentages of the available space.
Clearance Above/Below: The gap between the drawer face and adjacent drawers or cabinet edges. Use "Gola" for a finger-pull profile gap.
Absolute (mm): Override the calculated height with a fixed value for the drawer face height. Use with caution as drawers may not fit. Ideally set the height of the drawers you need to set and leave at least one drawer for the system to calculate automatically.
Space Above: Set a specific gap above the drawer box i.e. between top of drawer box and top of drawer face. Leave blank or set to auto to calculate automatically.
Drawers are numbered from the bottom up (1 = bottom drawer)
| Drawer | Height |
|---|---|
| 1 | |
| Total | 100% |