A cabinet

Basic kitchen base cabinet with left hinged door

Basic kitchen base cabinet with right hinged door

Basic kitchen base cabinet with left hinged door and adjustable shelves

Basic kitchen cabinet left hinged door and adjustable shelves

Base door with double doors

Base cabinet to house single appliances

Undrilled door and no back panel

Basic cabinet with integral plinth

600mm tall wall oven and 450mm tall microwave, equal sizes doors above and below

Fully customisable cabinet with door

Fully customisable cabinet

Base door with left hinged door and Gola profile along top of door

Base door with right hinged door and Gola profile along top of door

Base door with double doors and Gola profile along top of doors

Corner base unit with door on left

Designed for corner placement where an additional regular cabinet will be required on the right. The door is hinged off a central post and additional panels will be required to form a corner post on the frontage. The corner post ensures that the doors/drawers can operate without fouling andy handles. The door width can be customised.

Corner base unit with 500mm wide door on right

Designed for corner placement where a regular cabinet will be required on the left. The door is hinged off a central post and additional panels will be required to form a corner post on the frontage. The corner post ensures that the doors/drawers can operate without fouling andy handles

Corner base unit with 500mm wide door on left and Gola profile at top of door

Designed for corner placement where a regular cabinet will be required on the right. The door is hinged off a central post and additional panels will be required to form a corner post on the frontage. The corner post ensures that the doors/drawers can operate without fouling andy handles

Corner base unit with 500mm wide door on right and Gola profile at top of door

Designed for corner placement where a regular cabinet will be required on the left. The door is hinged off a central post and additional panels will be required to form a corner post on the frontage. The corner post ensures that the doors/drawers can operate without fouling andy handles

Two space cabinet

Three space cabinet

Four space cabinet

Drawerpack - Blum Movento with wooden drawer boxes

Drawerpack with runner positions to suit Blum Tandembox and wooden components for drawer base and back

Drawerpack with runner positions to suit Blum Legrabox and wooden components for drawer base and back

Drawerpack with runner positions to suit Blum Tandembox and wooden components for drawer base and back. Two size M drawers (cutlery) and one size C drawer (pan)

Drawerpack with runner positions to suit Blum Tandembox and wooden components for drawer base and back. Two size M drawers (cutlery) and one size C drawer (pan)

Drawerpack with runner positions to suit Blum Tandembox and wooden components for drawer base and back. One size M drawers (cutlery) and two size C drawer (pan). Gola handle profile

Drawerpack with runner positions to suit Blum Tandembox and wooden components for drawer base and back. Two size M drawers (cutlery) and one size C drawer (pan). Gola handle profile

Drawerpack with runner positions to suit Blum Tandembox and wooden components for drawer base and back. Two size C drawers and one internal drawer. Gola handle profile

Drawerpack with runner positions to suit Hafele Matrix and wooden components for drawer base and back. Gola handle profile

Drawerline kitchen cabinet

Kitchen wall cabinet with service void

Kitchen wall cabinet with service void for cabinet hangers and adjustable shelves

Kitchen wall cabinet with double doors and service void

Kitchen wall cabinet with service void for cabinet hangers and adjustable shelves and door are oversailed by 30mm

Kitchen wall cabinet with service void for cabinet hangers and adjustable shelves and door are oversailed by 30mm

Top box with cabinet hangers

Larder cabinet with service void and left hand door

Larder cabinet with service void and right hand door

Larder cabinet with service void and left hand door and Gola profile on right

Larder cabinet with service void and right hand door and Gola profile on left

Blum Space Tower for Legrabox

Fridge freezer cabinet, bottom door is 715mm tall

Kitchen pantry with external drawers and LED lighting

Wine rack

Wine rack double

Small Galley Kitchen

Cabinet set for a small galley layout kitchen. Cabinetry includes base units, wall units and towers. Some of the base units and towers are fixed to 600mm width for appliances. The whole configuration can be scaled but the scaling will be not applied to the 600mm fixed width units as you can't scale an applicance!

Oven and appliance cabinet

Customised version of C113 for Hamiliton Kitchens. The cabinet has four spaces S1 - S4. S1 starts at the bottom of the cabinet. The heights of each space can be specified under 'Extra parameters'. Whether or not each space has a back panel can also be set. If a space is set to have a height of zero then it is removed

Desk with side by side drawers

Bookshelf with integral plinth

Bookshelf wide with integral plinth

Wide bookshelf in grid configuration with integral plinth.

The number of cubby holes can be customised. Set the number of columns and the number of number of shelves within the columns

Angled left

Cabinet slopes right to left. The top panel is bevel angled at both ends as are the top edges of the right and left side panels

Angled left with internal drawers

Angled left with external drawers

Angled right

Angled right with internal drawers

Angled right with external drawers

Angled cabinet run

Chest of drawers using Blum Movento with wooden drawer boxes

Drawerpack - Blum Movento with wooden drawer boxes, integral plinth and finished top

Drawerpack - Blum Movento with wooden drawer boxes, integral plinth and finished top

Wardrobe

Wardrobe with external drawers

Wardrobe with external drawers

Wardrobe with internal drawers

Wardrobe with Blum Movento internal drawers and LED lighting

Wardrobe with integral plinth

Tall wardrobe with top doors and drawers

Wardrobe with no doors designed for walk-in wardrobe applications

Wardrobe with no doors and adjustable shelves designed for walk-in wardrobe applications

Three unit wardrobe with internal drawers

Washing machine stacking cabinet

Washing machine with drawer underneath

Bathroom cabinet with LED lighting

The doors are 'oversailed' - they extend 30mm beyond the cabinet length to form a finger pull area. This cabinet is intended for wall mounting

Display unit with storage underneath

Sideboard storage units

Media Wall With Drawers and Doors

Set of drawer boxes

Set of drawers without cabinet, if fitting into existing cabinet then the internal dimensions of the cabinet need to be provided

Single drawer box

Single drawer box without cabinet designed for fitting on Blum Movento drawer runners but it can also be specified for Blum Legrabox, BLum Tandembox and Hafele Matrix draewr box systems. This is a drawer box without drawer face. If you would like a drawer face as well design C210 is more appropriate as it has the full range of parameters needed to size the drawer box and the drawer face. The drawer box is assembled with Lamello Cabineo fixings if the material thickness is greater than 12mm. If the material is 12mm thick e.g. Birch ply then cam and dowel is used. In the case of a drawer box system (Legrabox,Tandembox, Matrix) the pieces supplied will be just the drawer underside (base). A key benefit of our approach is that fro example Legrabox requires 16mm thick parts so our system will mill the necessary parts to make it fit.

Adjustable shelves

Adjustable shelves where the start point can be specified using the below and above variables which creates three spaces S1 (below), S2 (middle where the selves will be), S3 (above). The variables shelves are only applied to the S2 space.

Floating Shelf. Formed from two panels sandwiched together and machined for Hafele Triade floating shelf hardware. Panels oversized to allow for trimming after glue up.

Left hinged door with side template

This assembly factors in clearances. For example if 600mm wide door is required this assembly will calculate it to be 595mm factoring in a 2.5mm clearance. The clearances can be changed but clearances are essential for the correct operation of concealed hinges

Double doors with side template

Double doors with left and right stub side panels with hinge plate drilling to use as templates. This assembly factors in clearances. For example if a 1200 wide door pair is required this assembly will calculate it to be 595mm factoring in a 2.5mm clearance. The clearances can be changed but clearances are essential for the correct operation of concealed hinges

Angled left door assembly

Angled left door with hinges on the long side (right). A stub right hand sidee panel with hinge plate drilling is provided as a template

Plinth panel

Scribe

End panel. Oversizing in all directions is supported.

Plain panel

Worktop panel. Position with x, y, z for placement on top of base units.

Angled right triple door assembly

A set of three doors hinged on the left and sloping down on the right side. The doors are spaced 5mm apart and the sloped top line is continuous factoring in the gap between the doors

Two vertical compartments

Three vertical compartments

Two horizontal compartments

Three horizontal compartments

T spaced compartments

Inverted T spaced compartments